1. Which is not the 'effect of accident on worker'?
(a) Injury to body (b) Production stoppage
(C) Loss of job (d) Financial loss
2. If affected worker is recovered within 10 hours, then which type of accident is it?
(a) Minor (b) Reportable
(c) Major (d) Fatal
3. What happens in fatal accident?
(a) Hospitalisation (b) Fractures
(c) Disablement (d) Death
4. Who can be responsible for accident?
(a) Worker (b) Management
()Working conditions (d) All the above
5. Who is responsible for "unguarded moving parts"?
(a)Workers (b) Management
(C) Government (d) None
6. Which is not included in the causes of accidents due to 'Unsafe Working Conditions'?
(a) Chemical leakages (b) Suffocation at work
(c)Irregular floor heights (d) Quarrels of workers
7. Which is not included in the 'causes of accidents' due to nature?
a) Floods (b) Gas leakage
() Heavy rains (d) Temperature strokes
8. Who gets affected directly or indirectly due to accidents?
(a) Worker (b) Industry
(c) Family of worker (d) All
Accident is
(a) Unfortunate (b) Mishappening
(C) Sudden (d) All the above
10. Which is not included in the cause of accident due to worker?
(a)Lack of concentration (b) Poor housekeeping9
(C)Mischievous behaviour
11. Which is not included in the cause of accident due to management?
(d) Overconfidence
(a) Bad habits of worker (b) Untrained workers
(c)Bad construction of plant (d) Faulty equipments
Management 4.16 Safety Management
12. Injury after accident disables the affected worker forever is -
(b) Major
accident.
(a) Fatal
()Permanent (d) None
13. Internal accident means
(a) Accident in the premises of company
(b) Injury without showing external signs
(c) Both
d) None
14. Which preventive measure industry should take to avoid accidents?
(e) Safety provisions
() Safety devices
15. Examples of fire hazards are .
(b) Training for safe working
(d) All the above
(a)Smoking
(c) Faculty electrical equipment
(b) Overloading power sockets
(d) All the above
16. Faulty electrical equipment may cause
(a) Fire hazards (b) Industrial accidents
(c) Loss of property
17. Fire involving solid materials is of type
(d) all the above
(A) (B)
(d)
a) (b)
c) (C) (D)
18. Fire involving flammable liquids such as petrol, diesel etc. is of type.
a) (A) (b) (B)
(C) (d) (D)
19. Fire involving gases is of type
A) (b) B)
(E) (d) (D)
20. Fire involving metals is of type
(a) B) (b) (C)
(c) (D) (d) (E)
21. E type of fire is by.
(a) Solid materials
(c) Electrical apparatus
(b) Gases
(d) Metals
22. Don't leave temporary equipment plugging .
(a) in, not in
() off, not in
-when its
(b) off, in
Use.
(d) in, in
23. Fire drill is
(a) Drilling in fire
() Demo of fire evacuation training
24. Whom to communicate before doing fire drill operation?
(a) Fire Marshall
(b) Fire Superintendent
25. During fire drill
1. Communicate evacuation routes to people
2. Create an in house safety committee
(a) only 1 is correct
(C) both are correct
(b) Fire near drill
(d) None of the above
(b) Fire Commander
(d) Fire Inspector
(b) only 2 is correct
(d) both are wrong
Management 4.17 Safety Management
ensures the safe evacuation of all individuals during fire dill.
(b) Supervisor
(d) Fire Inspector
26.
(a) Fire Marshall
(c) Fire Warden
27. During fire drill
1. Fire alarm system is not used
2. All individuals assembly at the master point
(a)only 1 is true
() both are true
(6) only 2 is true
(d) both are false
28. To give practice of evacuation in emergency. is done.
a) Fire (b) Fire drill
() Fire fight
29. Frequency of fire drill at fire prone places is
(d) Fire avwareness
(a) Once in a year (b) Once in 6 months
(c) Once in 3 months (d) Once in 2 months
30. Frequency of fire drill at non-fire prone places is.
(a) Once in a year
( Once in 3 months
is a documented format that authorizes specified people to work under conditions.
(b) Once in 6 months
(d) Once in 2 months
31.
(a) Work license (b) Work permit
(c)Work authority (d) Work order
32. In work, following facts are important.
(a) Specific work
() Specific area
(b) Specified time
(d) All the above
33. Work permit sets out the
(a) Risk, Permission
required to do work safely under
(b) Function, Labour law
()Process, Higher authority
34. Work permits is
()Precautions, Risk management
1. Formal recorded process
2. It is for authorized persons
3. There is no clear definition of responsibilities
(a) 1,2 correct; 3 incorrect (b) 1,2 incorrect, 3 correct
() 1 correct, 2, 3 incorrect
35. Work permit is done at -
1. High risk areas
(d) 1 incorrect; 2, 3 correct
2. Routine activities
(a) only 1 correct
(b) both correct
(b) only 2 correct
(d) both incorrect
36. Work permit is done at
(a) High voltage work (b) Electrical trouble shooting
(C) Pressure testing (d) All
37. When work permit is not required?
(a) Complex machinery (b) Emergency
()Work at height (d) Operational pipelines
38. is a person authorized by manager who will be responsible for keeping area and staff safe.
(b) Field operator
(d) Executor
(a) Issuer
(c) Responsible person
Management 4.18 Safety Management
is a person who is trained, competent and authorized to issue permit.
(a) Responsible person
39.
(6) Issuer
()Executor (d) Field operator
is a person who is trained, competent and authorized as per work permit.
(a) Field operator
0.
(b) Executor
() Issuer (d) Responsible person
1. is a person who is competent person and support the isolator at site and signs the work
permit.
(a) Executor (b) Field operator
) Issuer (d)Responsible person
42. Match the pairs:
1. Cold work (A) Fire
2. Hot work (B) Hand tools
3. Confined space (C)Welding
(D) Pipeline
(b) 1. (D), 2. (C), 3. (B), 4. (A)
4. Excavation
(a) 1. (B), 2. (C), 3. (D), 4. (A)
(b) 1. (A), 2. (B), 3. (C), 4. (D) (d) 1.(C), 2. (B), 3. (A), 4. (D)
43. Match the pairs
(A) Hand back of permit
(B) Prejob checks
(C) Remove isolation
Issue
2. Receipt
3. Clearance
Cancellation (D) Handover of permit
(a) 1. (D), 2. (C), 3. (B), 4. (A)
(C) 1.(A), 2. (B), 3. (C), 4. (D)
(b) (D), 2. (B), 3. (C), 4. (A)
(d) 1. (8), 2. (D), 3. (A), 4. (C)
44. Safety management does not ensure
(a) Safe workplace
() Standardization of operation
45. Safety management brings
(a) Repeatability
(c) Control
(b) Time management
(d) Investigation of accident
to safety operations.
(b) Avoidance
(d) None
46. Safety management does not apply.
(a) Standardization (b) Ensures centralized compliances
()Do not use software (d) Safety investigation process
47. Safety management softwares do not share data among
(a) Medical staff (b) Safety Professionals
() Customers (d) Supervisors
48. 1. Safety management is not helpful in corrective actions.
2. Safety management brings repeatability to safety operation.
(b) 2 is Correct
(d) Both Incorrect
(a) 1 is Corect
(C)Both Correct
49. Head protection does not help to safeguard .
(a) Burn hazards (b) Impact hazards
() Gas fumes (d) Penetration hazards
_is required when exposed to object falling from above.
(a) Head protection
(C) Hearing protection
b0.
(b) Eye protection
(d) Foot protection
Management 4.19 Safety Management
51. Face protection is not required in
(a) Flying particles (b) Gas vapours
C)Noise above 85 decibels (d) Molten metal
52. For extended period we should not be exposed to noise above decibles.
(a) 50 (6) 60
(c) 75 85
53. Protective clothings are not useful for .
(a) Open flames
(d)
(b) Falling object
(c) Low temperature (d)Liquid chemicals
54. Protective clothing must be. when exposed to rotating equipment.
a) Loose (b) Tight
(c)Both (d) None
55. Safe clothing includes
1. Shirts tucked in
2. Long sleeves buttoned
(a) Only 1 correct (b) Only 2 correct
(C)Both correct (d) Both incorrect
S6. All equipments should be .
(a) Locked in
to protect against accidental operation.
(b) Locked out
(c) Closed in (d) Closed out
57. Using hand tools one must care
(a) Work ith safety guards
( Shields
58. While working on electrical equipments ensure that all metal hand tools are
(b) Warning labels
(d) All the above
(a) Insulated (b) Folded
()Protected (d) None of the above
59. Never use. to remove dust and debris from clothing.
(a) hand tools (b) sticks
(C) clothes (d) compressed air
60. While using gas cylinders, use only those cylinders that are approved by.
(a) statement transportation
(c) district officials
(b) interstate transportation
(d) gas agencies
61. When there is doubt about how to use the cylinder, the user shall contact
a) Police (b) Supplier
(C) Fire control (d) None of the above
62. Regarding cylinders
1. Cylinders should be kept near elevators for easy transportation
2. Cylinders must be dragged, but not be rolled
(a) Only 1 correct
()Both correct
63. Match the pairs:
(b) Only 2 correct
(d) Both wrong
1. Gloves
2. Hard hats
3. Leather cap
4. Face protection
(a) 1. (A), 2. (B), 3. (C), 4. (D)
(A) Falling objects
(B) Hot sparks
(C)Welding
(D) Molten metal
Answers
1. (b) 2. (a) 3. (d)4. (d)5 (b)6. (d)7. (b) 8. (d) 9. (d)
12. (c)13.(b)14.d)15.d)
22.(a) 23.(c)
10.(b)
20.(c) 29.(c) 30.(b)
11.a)
21(b )_
31.(6)
.(b)
18.(b)19.(c)
28.(b
16.(a)
26.(c)
36.(d)
46.(0)
57.
17.(a)
27.0
37.(b)
24.(a) 25.(C)
32.(d) 33.(d) 34.a) 35.(a)_ 38.(C) 39.(5) 40.(6)
48.(b)
41.(a) 43.(d) 44.t 45. (a) .(a)
510( 6)
61.(6) 62.(d) 63.(C)
47.C)
42.(a) 49.(C) 50.(a
52. (d) 3.(b) 54.(b) 55.(c) 56..(d)
0 Comments